Charging the Remotes

When the Remotes are placed into the Phase Receiver, they automatically start charging if your Phase is powered through a computer or power outlet. The normal charging animation on the Remotes’ LED is an upward movement (as if the Remotes were filling up) and the LED dots on the Phase Receiver should be showing an outward motion.

It takes about two hours to fully charge your Remotes when their battery is empty. At this point, the LEDs will turn solid (they will stop flashing), indicating the charge is complete. You will notice that the movement of the LEDs on both your Remotes and the Receiver’s dots will stop. They will remain still and lit; this means your Remotes are fully charged.

Leaving the Remotes in the Receiver when fully charged won’t damage their batteries.

Click the button below to go to the next feature.