Remote internal calibration

Now that the Remotes are linked to the Receiver, their sensors have to be calibrated.

Take the Remotes out and place them on a flat and still surface

Simply take the Remotes out of the Receiver and place them on a flat and still surface (on your vinyls with the turntables stopped, for instance). During the calibration process, the Remotes’ LED strip displays a back and forth motion. When the LEDs become solid, the Remotes are ready to be used.

If you cannot calibrate the Remotes when you take them out of the Receiver, click here.

If you're ready to proceed to the next step, click on the button below.